Aktivierung der Arbeitsflächeneffekte unter openSUSE 11.1 nicht möglich



  • da kennt wohl jemand die Struktur der xorg.conf nicht?

    grep Extensions /etc/X11/xorg.conf
    

    bringt hier nichts, weil die für den Threadopener relevante Info in den Zeilen unterhalb der Zeile Section "Extensions" steht. Mit meiner less-Zeile findet er diese Zeile und kann bequem lesen, was unterhalb steht. Mit deiner grep-Zeile nicht.

    die xorg.conf kann zB so aussehen:

    Section "Extensions"
    EndSection
    

    oder auch zB so:

    Section "Extensions"
       Option            "Composite" "on"
    EndSection
    

    Da bringt es gar nichts, mit

    grep /etc/X11/xorg.conf
    

    zu testen, ob die Zeile "Extensions" existiert, die kann auch existieren, wenn "Composite" nicht aktiviert ist.



  • u-ser_l schrieb:

    da kennt wohl jemand die Struktur der xorg.conf nicht?

    Doch, hab ich schon das ein oder andere Mal gesehen. 🙂

    grep Extensions /etc/X11/xorg.conf
    

    bringt hier nichts, weil die für den Threadopener relevante Info in den Zeilen unterhalb der Zeile Section "Extensions" steht. Mit meiner less-Zeile findet er diese Zeile und kann bequem lesen, was unterhalb steht. Mit deiner grep-Zeile nicht.

    Hm? Wie schon gesagt, dafür gibts die -A-Option. Wenn Du die kanntest, wird Dir doch bestimmt klar sein, dass und warum man die hier verwenden sollte.

    Habe mich nur sehr über Dein Längenargument gewundert.



  • oh, die -A-Option ... jetzt auf einmal ... 👍

    dein Vorschlag war aber:

    Was spricht einfach gegen "grep Extensions /etc/X11/xorg.conf"?

    Das ist hier untauglich, basta.

    dein nachträglicher (nachdem ich dir erklären mußte, wieso grep alleine hier Mumpitz ist)
    Vorschlag grep -A ... ist nicht nur keine Verbesserung, sondern auch noch
    länger als mein

    less /etc/X11/xorg.conf    
    /Extensions
    

    und daher im Zweifelsfall abzulehnen, punkt.

    Abgesehen davon wäre grep -A hier drittens methodisch unschön, weil unbekannt ist, wieviele interessante Zeilen folgen.

    Weitere Versuche, mir unbegründet ans Bein zu p*nk*ln, kannst du in Zukunft stecken lassen, auch im Interesse der Sache.

    Für mich ist das Thema damit erledigt.



  • u-ser_l schrieb:

    (nachdem ich dir erklären mußte, wieso grep alleine hier Mumpitz ist)

    Klar, Du musst mir erklären, wie eine xorg.conf aussieht und wie grep funktioniert. 🙂

    sondern auch noch länger als mein

    Du fängst hier allen Ernstes an, Keystrokes zu zählen? "less foo.org[ENTER]/Extensions[ENTER]" ist genau wieviele Keystrokes kürzer als "grep -A5 Extensions foo.org[ENTER]"?

    Weitere Versuche, mir unbegründet ans Bein zu p*nk*ln, kannst du in Zukunft stecken lassen, auch im Interesse der Sache.

    Dir ans Bein pinkeln? Meine Güte, bist Du empfindlich.

    Aufgrund dieser Keystroke-Geschichte und des Smilies ging ich schlicht davon aus, dass Du -A nicht kanntest und herumblödelst, habe doch extra noch auf -C und -B verwiesen. Dass Du das (a) Ernst meinst und dann (b) noch so schnell sauer wirst, hätte ich einfach nicht gedacht.



  • @nman: für mich siehts auch wie anpinkeln an.

    aber das interssiert dich bestimmt nicht.



  • jenz schrieb:

    @nman: für mich siehts auch wie anpinkeln an.

    Besten Dank für die Wortmeldung. Was soll ich dazu jetzt sagen? Ich überschwemme meine Posts häufig nicht mit Smilies oder lese jeden kleinen Mist vor dem Posten mehrfach auf "Könnte sich da jemand angegriffen fühlen?" durch, weil ich mir momentan nicht so viel Zeit zum Posten nehmen kann.



  • nene, problematisch werden deine posts dadurch, dass sie zu anfang keinen mehrwert bringen bzw. auch nicht helfen und du dann die ganze zeit drauf rumreitest statt einfach einzusehen, dass dein post überflüssig war, wie alle folgenden auch.

    damit beziehe ich mich nur auf diesen fred.



  • jenz schrieb:

    nene, problematisch werden deine posts dadurch, dass sie zu anfang keinen mehrwert bringen bzw. auch nicht helfen und du dann die ganze zeit drauf rumreitest statt einfach einzusehen, dass dein post überflüssig war, wie alle folgenden auch.

    Ich habe im ersten Thread auf die Fedora-Foren verwiesen, wenn ich das nicht gerade erst gesehen hätte, hätte ich wohl nicht gepostet.

    Im zweiten Post dachte ich, dass userl herumblödelt und habe auf -B und -C verwiesen. Erst danach ging er hoch und die Sache wurde völlig überflüssig.

    Wenn Du öfters ein Problem mit meinen Beiträgen hast, schreib mir einfach eine Mail.



  • Ich habe das selbe Probelm und bei mir gibt der Befehl less /etc/X11/xorg.conf folgende ausgabe

    # /.../
    # SaX generated X11 config file
    # Created on: 2009-09-06T16:37:41+0200.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailma
    n/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
    FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
      Option       "ZapWarning" "on"
    EndSection
    
    Section "Module"
      Load         "freetype"
      Load         "dbe"
      Load         "dri"
      Load         "glx"
      Load         "extmod"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    Section "InputDevice"
      Driver       "mouse"
      Identifier   "Mouse[1]"
      Option       "Buttons" "12"
      Option       "Device" "/dev/input/mice"
      Option       "Name" "Logitech USB-PS/2 Optical Mouse"
      Option       "Protocol" "explorerps/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
      Driver       "synaptics"
      Identifier   "Mouse[3]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Emulate3Buttons" "on"
      Option       "HorizScrollDelta" "0"
      Option       "InputFashion" "Mouse"
      Option       "Name" "Synaptics;Touchpad"
      Option       "Protocol" "explorerps/2"
      Option       "SHMConfig" "on"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    Section "Monitor"
      Option       "CalcAlgorithm" "XServerPool"
      DisplaySize  305 230
      HorizSync    31-60
      Identifier   "Monitor[0]"
      ModelName    "1024X768@60HZ"
    Option       "DPMS"
      Option       "PreferredMode" "1152x864"
      VendorName   "--> LCD"
      VertRefresh  30-60
      UseModes     "Modes[0]"
    EndSection
    
    Section "Modes"
      Identifier   "Modes[0]"
    EndSection
    
    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth      15
        Modes      "1152x864" "1024x768" "1024x600" "800x600"
     "768x576" "640x480"
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "1152x864" "1024x768" "1024x600" "800x600"
     "768x576" "640x480"
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "1152x864" "1024x768" "1024x600" "800x600"
     "768x576" "640x480"
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "1152x864" "1024x768" "1024x600" "800x600"
     "768x576" "640x480"
      EndSubSection
      Device       "Device[0]"
    Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    Section "Device"
      BoardName    "GeForce 9300M GS"
      Driver       "nv"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "NVidia"
    EndSection
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      InputDevice  "Mouse[3]" "SendCoreEvents"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    
    Section "Extensions"
      Option       "Composite" "off"
    EndSection
    

    Wird da einer draus schlau?



  • Du nutzt den freien Treiber "nv", der besitzt keine 3D-Hardwareunterstützung. OpenSuse sollte beim Installieren eines neuen Treibers die Xorg.conf eigentlich anpassen, daher vermute ich mal, du hast den proprietären Treiber nicht installiert. Siehe ein paar Posts oben.



  • Ich habe auch das selbe Problem aber erst seit kurzem da es vorher einwandfrei funktioniert hat 😕 Weiß einer warum?

    # /.../
    # SaX generated X11 config file
    # Created on: 2009-10-05T17:38:57+0200.
    #
    # Version: 8.1
    # Contact: Marcus Schaefer <sax@suse.de>, 2005
    # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
    #
    # Automatically generated by [ISaX] (8.1)
    # PLEASE DO NOT EDIT THIS FILE!
    #
    
    Section "Files"
      FontPath     "/usr/share/fonts/misc:unscaled"
      FontPath     "/usr/share/fonts/local"
      FontPath     "/usr/share/fonts/75dpi:unscaled"
      FontPath     "/usr/share/fonts/100dpi:unscaled"
      FontPath     "/usr/share/fonts/Type1"
      FontPath     "/usr/share/fonts/URW"
      FontPath     "/usr/share/fonts/Speedo"
      FontPath     "/usr/share/fonts/PEX"
      FontPath     "/usr/share/fonts/cyrillic"
      FontPath     "/usr/share/fonts/latin2/misc:unscaled"
      FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
      FontPath     "/usr/share/fonts/latin2/Type1"
      FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
      FontPath     "/usr/share/fonts/baekmuk:unscaled"
      FontPath     "/usr/share/fonts/japanese:unscaled"
      FontPath     "/usr/share/fonts/kwintv"
      FontPath     "/usr/share/fonts/truetype"
      FontPath     "/usr/share/fonts/uni:unscaled"
      FontPath     "/usr/share/fonts/CID"
      FontPath     "/usr/share/fonts/ucs/misc:unscaled"
      FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
      FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/misc:unscaled"
      FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
      FontPath     "/usr/share/fonts/hellas/Type1"
      FontPath     "/usr/share/fonts/misc/sgi:unscaled"
      FontPath     "/usr/share/fonts/xtest"
      FontPath     "/opt/kde3/share/fonts"
      InputDevices "/dev/gpmdata"
      InputDevices "/dev/input/mice"
    EndSection
    
    Section "ServerFlags"
      Option       "AllowMouseOpenFail" "on"
      Option       "ZapWarning" "on"
    EndSection
    
    Section "Module"
      Load         "glx"
      Load         "dbe"
      Load         "extmod"
      Load         "dri"
      Load         "freetype"
    EndSection
    
    Section "InputDevice"
      Driver       "kbd"
      Identifier   "Keyboard[0]"
      Option       "Protocol" "Standard"
      Option       "XkbLayout" "de"
      Option       "XkbModel" "microsoftpro"
      Option       "XkbRules" "xfree86"
      Option       "XkbVariant" "nodeadkeys"
    EndSection
    
    Section "InputDevice"
      Driver       "synaptics"
      Identifier   "Mouse[1]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Emulate3Buttons" "on"
      Option       "HorizScrollDelta" "0"
      Option       "InputFashion" "Mouse"
      Option       "Name" "Synaptics;Touchpad"
      Option       "Protocol" "explorerps/2"
      Option       "SHMConfig" "on"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
      Driver       "mouse"
      Identifier   "Mouse[3]"
      Option       "Buttons" "5"
      Option       "Device" "/dev/input/mice"
      Option       "Name" "ImPS/2 Generic Wheel Mouse"
      Option       "Protocol" "explorerps/2"
      Option       "Vendor" "Sysp"
      Option       "ZAxisMapping" "4 5"
    EndSection
    
    Section "Monitor"
      Option       "CalcAlgorithm" "XServerPool"
      DisplaySize  305 230
      HorizSync    31-60
      Identifier   "Monitor[0]"
      ModelName    "1024X768@60HZ"
      Option       "DPMS"
      Option       "PreferredMode" "1152x864"
      VendorName   "--> LCD"
      VertRefresh  30-60
      UseModes     "Modes[0]"
    EndSection
    
    Section "Modes"
      Identifier   "Modes[0]"
    EndSection
    
    Section "Screen"
      DefaultDepth 24
      SubSection "Display"
        Depth      15
        Modes      "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      16
        Modes      "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      24
        Modes      "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      SubSection "Display"
        Depth      8
        Modes      "1152x864" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
      EndSubSection
      Device       "Device[0]"
      Identifier   "Screen[0]"
      Monitor      "Monitor[0]"
    EndSection
    
    Section "Device"
      BoardName    "GeForce 9300M GS"
      Driver       "nv"
      Identifier   "Device[0]"
      Screen       0
      VendorName   "NVidia"
    EndSection
    
    Section "ServerLayout"
      Identifier   "Layout[all]"
      InputDevice  "Keyboard[0]" "CoreKeyboard"
      InputDevice  "Mouse[1]" "CorePointer"
      InputDevice  "Mouse[3]" "SendCoreEvents"
      Option       "Clone" "off"
      Option       "Xinerama" "off"
      Screen       "Screen[0]"
    EndSection
    
    Section "DRI"
        Group      "video"
        Mode       0660
    EndSection
    
    Section "Extensions"
      Option       "Composite" "off"
    EndSection
    

    Ich musste mein Linux nochmal neu installieren und seid dem klappts nichtmehr 😞


Anmelden zum Antworten