KDE verloren

Dieser Befehl ‚xorgconfig’ wird in meinem System nicht gefunden. Kann es anders heißen bei Redhat?

Gruss
Popup

nman

Ja, wenn Du noch ein XFree86 hast, dann kann das auch XF86Config heißen, wie bereits gepostet wurde.

Kannst du deinen xserver denn ohne KDE starten?

Ich hab das gleiche Problem... Enlightenment(starte16) und KDE(startkde) gehen nicht aber xfce4(startxfce4) geht.

KDE hab ich zum laufen gekriegt, indem ich startx eingegeben hab und dann im xterm(wusste gar nicht, dass man automatisch n xterm kriegt hab's wohl immer mit Xorg statt startx getestet.) startkde eingegeben hab... hatte dann aber den Standard Windowmanager.

Werd nachher mal "export DISPLAY=:0.0" testen.

BTW ich hab Arch Linux und Xorg.

Diese Befehle Xorgconfig, XF86Config startxfce4 und Xorg sind bei mir nicht vorhanden. Hilft es, dass ich sie neu instaliere?

Gruss
Popup

Power Off

Probier mal SaX oder SaX2. Bei mir gibt es "xf86config". Geh mal als root in das Verzeichnis "/usr/bin/X11" und mach "ls" oder "ls X*" bzw. "ls x*".

Guck mal ins Verzeichnis "/etc/X11" und poste den Inhalt der Dateien "XF86Config" und "xorg.conf" hier.

Das Programm "xf86config" ist sehr krude, und erfordert, dass Du genau ueber Deinen Grafikkartenchipsatz sowie die Bildfrequenztoleranzen Deines Monitors bescheid weisst.

Du kannst ja erstmal die Bildschirmaufloesung / den Treiber auf Standard VGA stellen, damit ueberhaupt X Windows kommt. Mit "startx" kannst Du dann X starten, da sollte nur ein leerer X Bildschirm mit vielleicht noch xterm kommen. Notfalls musst Du von einer anderen Konsole aus (kannst Du mit Ctrl-Alt-F2 z.B. machen), "export DISPLAY=:0.0" (geht natuerlich nur, wenn X gestartet wurde) und dann "xterm &" machen. Mit Ctrl-Alt-F7 kommst Du auf den X-Bildschirm zurueck, und dort im xterm gibst Du "SaX" oder "SaX2" ein, dann kommt der grafische Konfigurator, wenn alles klappt.

nman

RedHat hat kein SaX.

Power Off

nman schrieb:

RedHat hat kein SaX.

Echt?? Ist das auch 'ne SuSE-Erweiterung?

Ich dachte, bei neueren X-Windows-Versionen waere mittlerweile ein grafisches Konfigurationsprogramm dabei?

nman

Power Off schrieb:

Echt?? Ist das auch 'ne SuSE-Erweiterung?

SaX = SuSE Advanced X Configuration Tool

Ich dachte, bei neueren X-Windows-Versionen waere mittlerweile ein grafisches Konfigurationsprogramm dabei?

Nein, das wäre auch kaum sinnvoll.

Die Befehle Sax, Sax2 und die Datei /etc/X11/xorg.conf gibt’s bei mir nicht.

ls X*
X Xconfigurator XF86_FBDev XFree86 Xmark Xnest Xprt Xtest Xvfb Xwrapper

ls x*
x11perf x11perfcomp xauth xbiff xbill xboing xcalc
xcin xclipboard xclock xcmsdb xconsole xcubes xcutsel
xdino xditview xdm xdpyinfo xedit xev xeyes xf86cfg
xf86config xfd xfindproxy xfontsel xfs xfsinfo xftcache
xfwp xg3 xgamma xgammon xgc xgetfile xhexagons xhost xieperf
xinit xisdnload xjewel xkbbell xkbcomp xkbevd xkbprint
xkbvleds xkbwatch xkill xload xloadimage xlogo xlsatoms
xlsclients xlsfonts xmag xman xmball xmdb xmessage xmixer
xmkmf xmlink xmodmap xmonisdn xmorph xoct xon xpanex xpilot
xpilots xplaycd xplaymidi xp-replay xprop xpyraminx xrdb
xrefresh xrubik xscreensaver xscreensaver-command xscreensaver-demo
xscreensaver-gl-helper xset xsetbg xsetmode xsetpointer xsetroot xskewb
xsm xstdcmap xterm xterm3d xtriangles xvidtune xview xvinfo xwd
xwininfo xwud

Inhalt von XF86Config

# File generated by anaconda.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:7100"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.

    # DontZoom
EndSection

# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/psaux"

#    For wheel support - can not be used with Emulate3Buttons
#
#    ZAxisMapping 4 5

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice
#    BaudRate	9600
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Emulate3Buttons
    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice
#    ChordMiddle

EndSection

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"
    Protocol    "Standard"

    AutoRepeat	500 5

# when using XQUEUE, comment out the above line, and uncomment the
# following line
    # Protocol   "Xqueue"

# Let the server do the NumLock processing.  This should only be 
# required when using pre-R6 clients
    # ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt         Meta
    RightAlt        Meta
    ScrollLock      Compose
    RightCtl        Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"
#
# If you'd like to disable the capslock key, use:
#    XkbOptions  "ctrl:nocaps"

     XkbRules    "xfree86"
     XkbModel    "pc105"
     XkbLayout   "us"     
     #XkbVariant  ""
     #XkbOptions  ""
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present
Section "Monitor"
    Identifier  "Generic Monitor"
    VendorName  "Unknown"
    ModelName   "Unknown"
#    HorizSync   31.5
#    VertRefresh 60
    HorizSync   35.15
    VertRefresh 55-65

#    ModeLine  "640x480"   25.175  640 664 760 800
#                                  480 491 493 525

# 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600"     36     800  824  896 1024
                                  600  601  603  625

EndSection

Section "Monitor"
    Identifier  "GSM42ea"
    VendorName  "Unknown"
    ModelName   "Unknown"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30 - 96

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50 - 160

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock	45
#        HTimings	1024 1048 1208 1264
#        VTimings	768 776 784 817
#        Flags		"Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# --320x200--
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
    Modeline "320x200"     12.588 320  336  384  400
                                  200  204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
    Modeline "320x240"     12.588 320  336  384  400
                                  240  245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
    Modeline "320x240"     15.750 320  336  384  400
                                  240  244  246  262 Doublescan
# --400x300--
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
    ModeLine "400x300"     18     400  416  448  512
                                  300  301  302  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
    Modeline "400x300"     20     400  416  480  528
                                  300  301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
    Modeline "400x300"     25     400  424  488  520
                                  300  319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300"     21.656 480  496  536  616
                                  300  301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
    Modeline "480x300"     23.890 480  496  576  632
                                  300  301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
    Modeline "480x300"     25     480  496  576  632
                                  300  301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
    Modeline "480x300"     29.952 480  504  584  624
                                  300  319  322  333 Doublescan

# Normal video modes

# -- 512x384
# 512x384 @ 78 Hz, 31.50 kHz hsync
    Modeline "512x384"    20.160 512  528  592  640
                                 384  385  388  404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
    Modeline "512x384"    22     512  528  592  640
                                 384  385  388  404 -HSync -VSync

# -- 640x400 --
# 640x400 @ 70 Hz, 31.5 kHz hsync
    Modeline "640x400"     25.175 640  664  760  800
                                  400  409  411  450
# 640x400 @ 85 Hz, 37.86 kHz hsync
    Modeline "640x400"     31.5   640  672 736   832
                                  400  401  404  445 -HSync +VSync

# --- 640x480 ---
# 640x480 @ 60 Hz, 31.5 kHz hsync
    Modeline "640x480"     25.175 640  664  760  800
                                  480  491  493  525
# 640x480 @ 72 Hz, 36.5 kHz hsync
    Modeline "640x480"     31.5   640  680  720  864
                                  480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
    ModeLine  "640x480"    31.5   640  656  720  840
                                  480  481  484  500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
    Modeline "640x480"     36     640  696  752  832
                                  480  481  484  509 -HSync -VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
    Modeline "640x480"     45.8   640  672  768  864
                                  480  488  494  530 -HSync -VSync

# --- 800x600 ---
# 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600"     36     800  824  896 1024
                                  600  601  603  625
# 800x600 @ 60 Hz, 37.8 kHz hsync
    Modeline "800x600"     40     800  840  968 1056
                                  600  601  605  628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
    Modeline "800x600"     50     800  856  976 1040
                                  600  637  643  666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
    Modeline  "800x600"    60.75  800  864  928 1088
                                  600  616  621  657 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
    Modeline  "800x600"    69.65  800  864  928 1088
                                  600  604  610  640 -HSync -VSync

# --- 1024x768 ---
# 1024x768 @ 60 Hz, 48.4 kHz hsync
    Modeline "1024x768"    65    1024 1032 1176 1344
                                 768  771  777  806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
    Modeline "1024x768"    75    1024 1048 1184 1328
                                 768  771  777  806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
    Modeline "1024x768"    85    1024 1032 1152 1360
                                 768  784  787  823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
    Modeline "1024x768"   98.9  1024 1056 1216 1408
                                768 782 788 822 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
    Modeline "1024x768"   115.5  1024 1056 1248 1440
                                 768  771  781  802 -HSync -VSync

# --- 1152x864 ---
# 1152x864 @ 60 Hz, 53.5 kHz hsync
    Modeline  "1152x864"   89.9  1152 1216 1472 1680
                                 864  868  876  892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
    Modeline  "1152x864"   92    1152 1208 1368 1474
                                 864  865  875  895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
    Modeline "1152x864"   110   1152 1240 1324 1552
                                864  864  876  908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
    Modeline "1152x864"   135    1152 1464 1592 1776
                                 864  864  876  908
# 1152x864 @ 100 Hz, 89.62 kHz hsync
    Modeline "1152x864"   137.65 1152 1184 1312 1536
                                 864  866  885  902 -HSync -VSync

# -- 1280x1024 --
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
    Modeline "1280x1024"  110    1280 1328 1512 1712
                                 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
    Modeline "1280x1024"  126.5 1280 1312 1472 1696
                                1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
    Modeline "1280x1024"  135    1280 1312 1456 1712
                                 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
    Modeline "1280x1024"  135    1280 1312 1416 1664
                                 1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
    Modeline "1280x1024"  157.5  1280 1344 1504 1728
                                 1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
    Modeline "1280x1024"  181.75 1280 1312 1440 1696
                                 1024 1031 1046 1072 -HSync -VSync

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
    Modeline "1400x1050"  129   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
    Modeline "1400x1050"  151   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
    Modeline "1400x1050"  162   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
    Modeline "1400x1050"  184   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

# -- 1600x1200 --
# 1600x1200 @ 60Hz, 75.00 kHz hsync
    Modeline "1600x1200"  162   1600 1664 1856 2160
                                1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
    Modeline "1600x1200"  189    1600 1664 1856 2160
                                 1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
    Modeline "1600x1200"  202.5  1600 1664 1856 2160
                                 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
    Modeline "1600x1200"  220    1600 1616 1808 2080
                                 1200 1204 1207 1244 +HSync +VSync

# -- 1800x1400 -- 

# 1800x1440 @ 64Hz, 96.15 kHz hsync 
    ModeLine "1800X1440"  230    1800 1896 2088 2392
                                 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync 
    ModeLine "1800X1440"  250    1800 1896 2088 2392
                                 1440 1441 1444 1490 +HSync +VSync

# -- 1920x1200 --

# 1920x1200 @ 70Hz, 87.50 KHz hsync
    Modeline "1920x1200"  230    1920 1936 2096 2528
                                 1200 1201 1204 1250 +HSync +VSync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier        "Generic VGA Card"
    VendorName        "Unknown"
    BoardName         "Unknown"
    Chipset           "generic"
EndSection

Section "Device"
    Identifier         "RIVA TNT2"
    VideoRam           32768
EndSection

# **********************************************************************
# Screen section
# **********************************************************************

# The kernel framebuffer server
Section "Screen"
    Driver      "fbdev"
    Device      "Generic VGA Card"
    Monitor     "GSM42ea"
    Subsection  "Display"
#        Depth       16
        Depth      16
        Modes       "default"
    EndSubsection
EndSection

# The 16-color VGA server
Section "Screen"
    Driver      "vga16"
    Device      "Generic VGA Card"
    Monitor     "GSM42ea"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The Mono server
Section "Screen"
    Driver      "vga2"
    Device      "Generic VGA Card"
    Monitor     "GSM42ea"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The svga server
Section "Screen"
    Driver      "svga"
    Device      "RIVA TNT2"
    Monitor     "GSM42ea"
    DefaultColorDepth 32

    Subsection "Display"
        Depth       32
        Modes       "1152x864" 
        ViewPort    0 0
    EndSubsection
EndSection

# The accel server
Section "Screen"
    Driver      "accel"
    Device      "RIVA TNT2"
    Monitor     "GSM42ea"
    DefaultColorDepth 32

    Subsection "Display"
        Depth       32
        Modes       "1152x864" 
        ViewPort    0 0
    EndSubsection
EndSection

Gruss
Popup

edit nman: Nächstes Mal kümmer Dich bitte zumindest selbst um die Codetags, wenn Du schon solche elendslangen Configs postest.

nman

Mitdenken tut nicht weh, versuch mal "xf86cfg".

Mit xf86cfg bekommt man diesen Fehler

Xfree86 has fount a valid card configuration. Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward ‘scanpci -v’ output to Xfree86 support team.

Ich habe auch xf86config probiert. Nach ein Paar Eingaben von Parametern ist dieser Fehler zu sehen

Failed to open filename for writing.

Gruss
Popup

nman

Hast Du das auch als root probiert?

calvin-gr

poste doch mal den inhalt von var/log/XFree86.0.log

Sgt. Nukem

calvin-gr schrieb:

poste doch mal den inhalt von var/log/XFree86.0.log

NEIN!! BITTE NICHT!!!

Hier der Inhalt von XFree86.0.log

XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-25) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] 
Build Host: daffy.perf.redhat.com

Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar  5 09:18:43 2005
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "RIVA TNT2"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.4
	XFree86 XInput driver : 0.2
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 05 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 05 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 8086,2440 rev 05 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,2440 rev 05 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 8086,2440 rev 05 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 13f6,0300 rev 05 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0171 card 107d,2870 rev a3 class 03,00,00 hdr 00
(II) PCI: 03:03:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,2), BCTRL: 0x0f (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0xddc00000 - 0xdfdfffff (0x2200000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0xcd700000 - 0xdd9fffff (0x10300000) MX[B]
(II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 3 I/O range:
	[0] -1	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[1] -1	0x0000c400 - 0x0000c4ff (0x100) IX[B]
	[2] -1	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[3] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
	[0] -1	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
	[0] -1	0xdda00000 - 0xddafffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 2: bridge is at (0:0:0), (-1,2,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0171) rev 163, Mem @ 0xde000000/24, 0xd0000000/27, 0xdd980000/19, BIOS @ 0xdfde0000/17
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0xdfefff00 - 0xdfefffff (0x100) MX[B]
	[1] -1	0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
	[2] -1	0xdfde0000 - 0xdfdfffff (0x20000) MX[B](B)
	[3] -1	0xdd980000 - 0xdd9fffff (0x80000) MX[B](B)
	[4] -1	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[5] -1	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
	[6] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
	[7] -1	0x0000e800 - 0x0000e83f (0x40) IX[B]
	[8] -1	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[9] -1	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[10] -1	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[11] -1	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xdfefff00 - 0xdfefffff (0x100) MX[B]
	[1] -1	0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
	[2] -1	0xdfde0000 - 0xdfdfffff (0x20000) MX[B](B)
	[3] -1	0xdd980000 - 0xdd9fffff (0x80000) MX[B](B)
	[4] -1	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[5] -1	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
	[6] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
	[7] -1	0x0000e800 - 0x0000e83f (0x40) IX[B]
	[8] -1	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[9] -1	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[10] -1	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[11] -1	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xdfefff00 - 0xdfefffff (0x100) MX[B]
	[6] -1	0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
	[7] -1	0xdfde0000 - 0xdfdfffff (0x20000) MX[B](B)
	[8] -1	0xdd980000 - 0xdd9fffff (0x80000) MX[B](B)
	[9] -1	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
	[11] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0x0000cc00 - 0x0000ccff (0x100) IX[B]
	[14] -1	0x0000e800 - 0x0000e83f (0x40) IX[B]
	[15] -1	0x0000ec00 - 0x0000ecff (0x100) IX[B]
	[16] -1	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[17] -1	0x0000e000 - 0x0000e01f (0x20) IX[B]
	[18] -1	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 0.0.2
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.2
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
	RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
	RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
	Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
	Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
	GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
	GeForce3 (rev 3)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

Gruss
Popup

nman

Bist Du sicher, dass Du eine Riva hast?
X kann sowas nämlich nicht finden, wie Du an der einzelnen EE-Zeile unschwer erkennen kannst.

Vielleicht liegt es daran, daß die Grafikkarte falsch ist. Ich glaube, meine Karte ist Winfast. Aber Linux erkennt Hardware automatisch, nicht wahr? Wenn das wahr wäre, was würdet ihr vorschlagen?

Gruß
Popup

nman

popup schrieb:

Vielleicht liegt es daran, daß die Grafikkarte falsch ist. Ich glaube, meine Karte ist Winfast.

Tja, dann liegt das garantiert daran.
Wobei Winfast ja nur der Karten-Markenname ist, nicht der Chipsatz des Boards und somit ist das X völlig egal.

Aber Linux erkennt Hardware automatisch, nicht wahr?

Nein, "Linux" per se tut das nicht.

Wenn das wahr wäre, was würdet ihr vorschlagen?

Richtige Karte einstellen?