smart Festplattendaten auswerten
-
Ist diese Festplatte noch gut?
smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: ############## LU WWN Device Id: 5 000cca 375ddabb8 Firmware Version: JP4OA3MA User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Nov 19 17:34:16 2013 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9455) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 158) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 93 3 Spin_Up_Time 0x0007 118 118 024 Pre-fail Always - 320 (Average 322) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1216 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 31 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 9180 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1215 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1216 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1216 194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 8/39) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9180 - # 2 Short offline Completed without error 00% 8902 - # 3 Short offline Completed without error 00% 8902 - # 4 Short offline Completed without error 00% 3899 - # 5 Short offline Completed without error 00% 349 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.Und wie sieht es mit der hier aus:
smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HUS724020ALA640 Serial Number: XXXXXXXXXXXXXX LU WWN Device Id: 5 000cca 22dc74dcc Firmware Version: MF6OAA70 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Nov 19 17:35:07 2013 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 312) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 3 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 20/32) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
-
ROFL! Nehm doch einfach ein GUI-Tool, die machen dann eine grafische Darstellung.
-
Sabrina-DE schrieb:
ROFL! Nehm doch einfach ein GUI-Tool, die machen dann eine grafische Darstellung.
Nö, die zeigen auch nur RAW Werte an, wenn gilt:
Device is: Not in smartctl database
-
Seblim schrieb:
Sabrina-DE schrieb:
ROFL! Nehm doch einfach ein GUI-Tool, die machen dann eine grafische Darstellung.
Nö, die zeigen auch nur RAW Werte an, wenn gilt:
Device is: Not in smartctl databaseEs gibt da einige, die min. grün, gelb und rot kennen und einen Hinweis geben, wenn Datenverlust bevorsteht.
-
Sabrina-DE schrieb:
Seblim schrieb:
Sabrina-DE schrieb:
ROFL! Nehm doch einfach ein GUI-Tool, die machen dann eine grafische Darstellung.
Nö, die zeigen auch nur RAW Werte an, wenn gilt:
Device is: Not in smartctl databaseEs gibt da einige, die min. grün, gelb und rot kennen und einen Hinweis geben, wenn Datenverlust bevorsteht.
Ja und mit Rohdaten die sie nicht kennen, können die auch nichts brauchbares anzeigen.
-
Außerdem sind so Ampelschilder nur eine Vereinfachung dessen, was dahinter steckt.
Da die Programme den Einsatzzweck der Platten nicht kennen, können sie nur so ungefähr sagen, ob es Zeit wird die Platte auszutauschen.
-
Die rufen die Daten eben selber direkt über SMART ab. Wenn Du dir selber eine aufwendige Grafikdarstellung nach eigenen Vorstellungen machen willst, dann musst Du dir da selber was ausdenken.
-
Seblim schrieb:
Ist diese Festplatte noch gut?
Die Frage koennen dir die SMART-Daten nicht beantworten. Die sagen dir nur, ob eine Festplatte fehlerhaft aussieht. Ich hatte schon oefters Disks, deren SMART-Daten voellig ok waren, die aber im Betrieb IO-Errors am laufenden Band produzierten.
Die wichtigsten SMART-Fehlerindikatoren sind die beiden hier:
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0Und die sehen bei beiden Disks ok aus.