Kein ADSL Signal mit IPCOP 1.4 + Speedtouch USB rev.0.00
-
Hallo,
Ich erhalte folgende Fehlermeldung: firewall modem_run[286]: ADSL synchronization timed out - the monitoring instance will report further state changes
Ich habe den akutellsten Treiber von www.speedtouch.com verwendet. Das ADSL Signal funktioniert mit einem Zyxel ADSL Router problemlos.
Danke für die Unterstützung.
PS: Alle relevante Logeinträge:
Oct 5 16:28:48 firewall modem_run[286]: Best offset 36 with probability 100%
Oct 5 16:28:48 firewall modem_run[286]: Best offset 983 with probability 100%
Oct 5 16:28:48 firewall modem_run[286]: Firmware info (CRC:0xd80bf9f7, Size:991, Checked: Yes, Alcatel/Thomson Boot block (old))
Oct 5 16:28:48 firewall modem_run[286]: Best offset 1027 with probability 100%
Oct 5 16:28:48 firewall modem_run[286]: Best offset 762642 with probability 100%
Oct 5 16:28:48 firewall modem_run[286]: Firmware info (CRC:0x78039fed, Size:762650, Checked: Yes, 3.0.6 - MacOSX - Win32)
Oct 5 16:28:50 firewall kernel: usb_control/bulk_msg: timeout
Oct 5 16:28:50 firewall kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
Oct 5 16:28:50 firewall modem_run[286]: BLOCK1 : 991 bytes uploaded : OK
Oct 5 16:28:51 firewall modem_run[286]: BLOCK2 : 511 bytes downloaded : OK
Oct 5 16:28:53 firewall modem_run[286]: BLOCK3 : 762650 bytes uploaded : OK
Oct 5 16:28:53 firewall modem_run[286]: BLOCK4 : 511 bytes downloaded : OK
Oct 5 16:28:54 firewall modem_run[286]: Modem reference : 3EC18607CDAA02
Oct 5 16:30:24 firewall modem_run[286]: ADSL synchronization timed out - the monitoring instance will report further state changes
-
hab das selbe Problem