Auflösung umschalten



  • Hi,
    mein XFree 4.3 schafft es irgendwie nicht, (beim starten eines spiels zb) eine niedrigere auflösung, die funktioniert, zu wählen. ich hab nicht viel ahnung von X, hab in der XF86Config die daten meines tfts (laut handbuch) eingegeben (also vsync und hrefresh) und jedesmal, wenn ich die auflösung umschalten will, erscheint das bild extrem verzerrt - man kann nichts mehr erkennen, der schirm ist aber nicht schwarz.
    ich vermute, irgendwo muss man die passenden frequenzen zu den auflösungen angeben, ich weiß aber nicht wo. oder vielleicht hat das ganze eine total andere ursache?



  • Morgen!

    Die Datei die du wohl bearbeiten musst findet sich (bei mir) in /etc/X11 und heißt
    XF86Config. Dort steht die Konfiguration deines X Servers, also des graphischen
    Displays drin.

    Ich weiß nicht obs daran liegt, aber such mal die "Section \"Screen\" ", und verändere
    sie wie folgt:

    Section "Screen"
        Identifier  "Screen 1"         <-lassen so wies ist / nicht übernehmen
        Device      "NVIDIA GeForce"   <-das gleiche
        Monitor     "My Monitor"       <- dito
    
        DefaultDepth 24                
        Subsection "Display"
            Depth       24
            Modes      "1024x768" "800x600" "640x480" <- darauf kommts wohl an
            ViewPort    0 0 
    	Virtual     1024 768
        EndSubsection
    EndSection
    

    Nun kannst du auch mit STRG+ALT+Keypad+/- die Auflösung on the fly ändern.
    Ich denke so sollte es klappen.

    Wenn nicht:
    Sicher dass dein OpenGL richtig läuft? Führe mal glxgears aus



  • da brauch ich nicht viel verändern..
    mit strg+alt++/- funktioniert nur die auflösung 1280*1024 (das ist auch ok so) nur alle anderen eben nicht...
    x stürzt auch nicht ab...



  • Ich hab in der Monitor Section mit der HorizSync herumgespielt; es scheint so, als würde X zwar die auflösung wechseln, aber die HorizSync gleichbleiben lassen.
    deshalb ist das bild auch so verzerrt, denk ich.
    nur: mehr als einen Bereich 30-80 oder die einzelnen werte 60.0, 63.9, 80.0 aus dem manual des monitors eintragen, das kann ich auch nicht.



  • Poste doch einfach mal Deine XF86Config! 🙂



  • ok (achtung, bin leihct angeheirtert *g*)

    einmal die, die ich jetzt verwende (mit vesa treiber)

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "speedo"
    #    Load        "freetype"
    #    Load        "xtt"
    
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/freefont/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    
    #    Option "DontVTSwitch"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client. 
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings. 
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"Keyboard"
    
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option	"Xleds"      "1 2 3"
    
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    
    # These are the default XKB settings for XFree86
    #    Option "XkbRules"    "xfree86"
    #    Option "XkbModel"    "pc101"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xfree86"
        Option "XkbModel"	"pc105"
        Option "XkbLayout"	"de"
    
    EndSection
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver	"mouse"
        Option "Protocol"    "IMPS/2"
        Option "Device"      "/dev/psaux"
        Option "ZAxisMapping" "4 5"
    # Mouse-speed setting for PS/2 mouse.
    
    #    Option "Resolution"	"256"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"	"Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"	"9600"
    #    Option "SampleRate"	"150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    # **********************************************************************
    # Other input device sections 
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice" 
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "Philips 170C"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
    # Old:   HorizSync   31.5 - 64.3
    # Monitor:    HorizSync 31.2-80
       HorizSync 30-80
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # Old: VertRefresh 50-70
    # Monitor:    VertRefresh 50-75
      VertRefresh 56-76
    
    EndSection
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier	"Standard VGA"
        VendorName	"Unknown"
        BoardName	"Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset	"generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    
    #    BusID      "PCI:0:10:0"
    
    #    VideoRam	256
    
    #    Clocks	25.2 28.3
    
    EndSection
    
    # Device configured by xf86config:
    
    Section "Device"
        Identifier  "* Generic VESA compatible"
        Driver      "vesa"
    # the following line was commented
        VideoRam    131072
        # Insert Clocks lines here if appropriate
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "* Generic VESA compatible"
        Monitor     "Philips 170C"
        DefaultDepth 24
    
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
            Virtual	    1280 1024
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    #    Mode 0666
    # EndSection
    

    hier tritt obengananntes problem auf.

    und dann noch die runtergeladene fglrx version

    # File: XF86Config-4
    # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
    
    # Note by ATI: the below copyright notice is there for servicing possibly
    # pending third party rights on the file format and the instance of this file.
    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # **********************************************************************
    # DRI Section
    # **********************************************************************
    Section "dri"
    # Access to OpenGL ICD is allowed for all users:
        Mode 0666
    # Access to OpenGL ICD is restricted to a specific user group:
    #    Group 100    # users
    #    Mode 0660
    EndSection
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
    #      Option    "omit xfree86-dga" 
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "freetype"
    
    # This loads the GLX module
        Load        "glx"   # libglx.a
        Load        "dri"   # libdri.a
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client. 
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings. 
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option "Protocol"   "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option "Xleds"      "1 2 3"
    
    #    Option "LeftAlt"    "Meta"
    #    Option "RightAlt"   "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"   "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"   "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"  "de"
    # or:
    #    Option "XkbLayout"  "de"
    #    Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions" "ctrl:swapcaps"
    
    # These are the default XKB settings for XFree86
    #    Option "XkbRules"   "xfree86"
    #    Option "XkbModel"   "pc101"
    #    Option "XkbLayout"  "us"
    #    Option "XkbVariant" ""
    #    Option "XkbOptions" ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xfree86"
        Option "XkbModel"	"pc105"
        Option "XkbLayout"	"de"
    
    EndSection
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver "mouse"
        Option "Protocol"   "ImPS/2"
        Option "ZAxisMapping"   "4 5"
        Option "Device"     "/dev/psaux"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"   "Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"   "9600"
    #    Option "SampleRate" "150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    # **********************************************************************
    # Other input device sections 
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice" 
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "1412"
    #    Option     "MaxX"           "15184"
    #    Option     "MinY"           "15372"
    #    Option     "MaxY"           "1230"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "231"
    #    Option     "MaxX"           "3868"
    #    Option     "MinY"           "3858"
    #    Option     "MaxY"           "272"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonThreshold"    "17"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
        Identifier  "Monitor0"
        HorizSync   30-80
        VertRefresh 56-76
        Option "DPMS"
    
    # === mode lines based on GTF ===
    # VGA @ 100Hz
    # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
    # SVGA @ 100Hz
    # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
    # XVGA @ 100Hz
    # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
    # 1152x864 @ 60Hz
    # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
    # 1152x864 @ 85Hz
    # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
    # 1152x864 @ 100Hz
    # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
    # 1280x960 @ 75Hz
    # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
    # 1280x960 @ 100Hz
    # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
    # SXGA @ 100Hz
    # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
    # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
    # Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
    # 1600x1000 @ 60Hz
    # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
    # 1600x1000 @ 75Hz
    # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
    # 1600x1000 @ 85Hz
    # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
    # 1600x1000 @ 100Hz
    # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
    # 1600x1024 @ 60Hz
    #Modeline "1280x1024" 136.385 1280 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
    # 1600x1024 @ 75Hz
    # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
    # 1600x1024 @ 76Hz
    # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
    # 1600x1024 @ 85Hz
    # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
    # 1920x1080 @ 60Hz
    # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
    # 1920x1080 @ 75Hz
    # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
    # 1920x1200 @ 60Hz
    # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
    # 1920x1200 @ 75Hz
    # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 1400x1050 @ 60Hz M9 Laptop mode 
    # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
    # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
    # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
    
    EndSection
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset     "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver      "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # installed.
    
    #    BusID       "PCI:0:10:0"
    
    #    VideoRam    256
    
    #    Clocks      25.2 28.3
    
    EndSection
    
    # === ATI device section ===
    
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
    # ### generic DRI settings ###
    # === disable PnP Monitor  ===
        #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === misc DRI settings ===
        Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
    # ### FireGL DDX driver module specific settings ###
    # === Screen Management ===
        Option "DesktopSetup"               "0x00000000" 
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "unspecified" 
        Option "VRefresh2"                  "unspecified" 
        Option "ScreenOverlap"              "0" 
    # === TV-out Management ===
        Option "NoTV"                       "yes"     
        Option "TVStandard"                 "NTSC-M"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000800"
    # === Video Overlay for the Xv extension ===
       # Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "yes"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "2"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        BusID "PCI:1:0:0"    # vendor=1002, device=4150
        Screen 0
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
    
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0  # initial origin if mode is smaller than desktop
    #        Virtual     1280 1024
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Server Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.
    
        Screen "Screen0"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    ### EOF ###
    

    hier kann ich zwar die auflösungen ändern, allerdings gibt es bei jeder auflösung nach start eines programms streifen (pixelige) am ganzen bildschhirm-> unbenutzbera.
    außerdem: wenn ich den virtualsceen großer mache, dann gibt es noch mehr streifen. Die Option plug&play monitor hab ich schon mit on/off(und dann eben die benutzerdefinierten hs und vs) ausprobiert. immer mit striefen

    mein monitor: philips 170C ; grafikkarte: Connect3d ATI Radoeon 96010



  • wenn ich den Virtual Screen auf die gewünschte auflösung (manuell) umschalte, dann funktioniert es genau in dieser auflösung.

    Virtual 1280 1024

    dann funktioniert ebendieser modus. und NUR dieser.

    Virtual 0 0

    irgendwo hab ich gehört, dass da der virtuelle screen angepasst wird. schein aber nicht zu klappen...



  • Uff, das sieht ja heftig aus; soll ich einfach mal meine handgeschriebene XF86Config posten? Die ist weitaus übersichtlicher und das Anpassen an Deine Hardware wird ziemlich leicht sein.



  • ja bitte 🙂



  • Viel Glück damit! 🙂

    #/////////////////////////////////////////////////////////////////////////
    # **********************************************************************//
    # Refer to the XF86Config(4/5) man page for details about the format of //
    # this file.                                                            //
    # **********************************************************************//
    #/////////////////////////////////////////////////////////////////////////
    
    ##################
    # Module section #
    ##################
    Section "Module"
            Load            "dbe"   # Double buffer extension
            Load            "glx"
            SubSection "extmod"
    #               Option    "omit xfree86-dga"
            EndSubSection
            Load    "type1"
            Load    "freetype"
    EndSection
    
    #################
    # Files section #
    #################
    Section "Files"
            RgbPath "/usr/X11R6/lib/X11/rgb"
            FontPath "/usr/X11R6/lib/X11/fonts/local/"
            FontPath "/usr/X11R6/lib/X11/fonts/misc/"
            FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
            FontPath "/usr/X11R6/lib/X11/fonts/sharefonts/"
            FontPath "/usr/X11R6/lib/X11/fonts/freefonts/"
            FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
            FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
            FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
            #FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
            FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
            FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
            ModulePath "/opt/nvidia/modules"
            ModulePath "/usr/X11R6/lib/modules"
    EndSection
    
    #################
    # Input devices #
    #################
    Section "InputDevice"
            Identifier              "Keyboard1"
            Driver                  "Keyboard"
            Option "Protocol"       "Standard"
            Option "AutoRepeat"     "500 30"
            Option "XkbRules"       "xfree86"
            Option "XkbModel"       "pc104"
            Option "XkbLayout"      "de"
    EndSection
    Section "InputDevice"
            Identifier              "IntelliMouse Explorer"
            Driver                  "mouse"
            Option  "Protocol"      "ExplorerPS/2"
            Option  "Device"        "/dev/mouse"
            Option  "ZAxisMapping"  "6 7"
            Option  "Buttons"       "7"
    EndSection
    
    ###################
    # Monitor section #
    ###################
    Section "Monitor"
            Identifier      "PR960F"
            HorizSync       30.0 - 110.0
            VertRefresh     50.0 - 160.0
            DisplaySize     364 273
            Option          "DPMS"
    EndSection
    
    ###########################
    # Graphics device section #
    ###########################
    Section "Device"
            Identifier      "NVIDIA GeForce"
            Option          "NoLogo" "on"
            Option          "NvAGP" "1"
            Option          "AGPMode" "2"
            Driver          "nvidia"
    EndSection
    
    ###################
    # Screen sections #
    ###################
    Section "Screen"
            Identifier  "standard-screen"
            Device      "NVIDIA GeForce"
            Monitor     "PR960F"
            DefaultDepth 24
            Subsection "Display"
                    Depth           16
                    Modes           "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
                    ViewPort        0 0
            EndSubsection
            Subsection "Display"
                    Depth           24
                    Modes           "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
                    ViewPort        0 0
            EndSubsection
    EndSection
    
    #########################
    # ServerLayout section  #
    #########################
    Section "ServerLayout"
            Identifier      "standard-layout"
            Screen          "standard-screen"
            InputDevice     "IntelliMouseExplorer" "CorePointer"
            InputDevice     "Keyboard1" "CoreKeyboard"
    EndSection
    


  • Hallo,
    das funktioniert leider auch nicht. VESA Treiber- gleiches Problem, fglrx (Radeon) Treiber auch. Ich glaub ich werd auf die nächste XFree Version warten (oder irgendwann auf X Server von freedesktop.org umsteigen).
    Derweil starte ich X einfach auf verschiedenen displays mit unterschiedlicher auflösung.



  • So leicht gebe ich mich nicht geschlagen; ich schreib Dich mal im ICQ an! 🙂


Log in to reply